Diverter

Recently Viewed Products

No recently viewed products to display

Diverter - Bathroom Diverter Valves & Full Sets

A diverter is a valve that sends water from one supply line to different outlets - an overhead shower, a hand shower, a body jet or a bath spout - so one plumbing line can run several fittings. You turn a knob, push a button or flip a lever, and the water changes destination. That's the whole job, and everything else on this page is about doing that job well for a decade.Grafdoer manufactures diverters for bathrooms across concealed, single lever and thermostatic formats, with three to six outlets and finishes in chrome, matte black, gold and rose gold.

What Is a Diverter?

A diverter (also called a plumbing diverter or water diverter) is the control unit that decides where water goes. A mixer decides the temperature. A diverter decides the destination. In most modern bathrooms, one fitting does both.Without a diverter, every outlet in your shower area would need its own dedicated supply line and its own valve - expensive, ugly, and a nightmare inside a finished wall. A single diverter for a bathroom collapses all of that into one wall plate.

How a Diverter Valve Works

Inside the body sits a ceramic cartridge or a spindle mechanism. When you operate the control, an internal port opens toward one outlet and closes the others. Good cartridges give you a clean switch with no dribble from the outlet you just turned off - that dribble is the classic sign of a worn or cheap shower diverter valve.Three control formats dominate:
  • Knob / quarter-turn - rotate to select the outlet. Simple, robust, easy to service.
  • Push-button (switch button) - press one button per outlet. Fast, intuitive, and increasingly the premium choice.
  • Lever - a single lever diverter handles flow, and often temperature, in one movement.

Diverter vs Mixer vs Concealed Part - Clearing the Confusion

This trips up a lot of buyers, so here it is plainly:
ComponentWhat it does
MixerBlends hot and cold water to your chosen temperature
DiverterRoutes that blended water to a chosen outlet
Diverter mixerOne unit doing both - the most common bathroom purchase
Concealed part / bodyThe brass body buried inside the wall that the visible trim mounts onto
A diverter set is the visible trim (handle, plate, escutcheon) plus the concealed body. A diverter full set typically bundles that with the wall union and mounting hardware, so the plumber isn't hunting for parts on installation day.

Types of Bathroom Diverters

Concealed Diverter

The body goes inside the wall; only the plate and handle are visible. This is the standard for premium bathrooms because it gives you a flush, minimal wall with nothing protruding into the shower space. The trade-off: it must be planned before tiling. Once the tiles are on, retrofitting a concealed diverter means breaking the wall.
  • Best for: new builds, full renovations, hotels, luxury residential projects.

Single Lever Diverter

One lever, one movement - temperature and flow together, with the diverter function integrated. It's the most ergonomic option and the easiest for guests and older users. A single lever concealed diverter is the most-specified format in Indian apartment projects right now, simply because it looks contemporary and requires no explanation.
  • Best for: family bathrooms, rentals, hospitality, anywhere ease of use matters.

Thermostatic & Switch-Button Diverter

The premium tier. A thermostatic cartridge holds your set temperature even when someone flushes a toilet elsewhere in the building - no sudden cold or scalding spike. Pair that with switch-button outlet selection and you get a control panel where each button is one outlet: rain shower, hand shower, body jets, spout.The Grafdoer Clyra Thermo series sits here - switch-button diverters available in 3, 4, 5 and 6 outlet configurations, each offered in chrome, black, gold and rose gold.
  • Best for: multi-outlet shower enclosures, hotels, spas, high-end residential.

Exposed Wall Mixer with Diverter Spout

The surface-mounted classic. The body sits on the wall, with a diverter spout below feeding the bucket or bathtub and an upward outlet feeding the overhead shower. No wall-breaking required, which makes it the go-to for replacement work and budget-conscious refits.
  • Best for: retrofits, rental properties, quick upgrades, DIY installs.

How Many Outlets Do You Need? (3-Way to 6-Way Explained)

This is the decision most buyers get wrong - they buy for the bathroom they have instead of the bathroom they're building.
OutletsTypical setup
3-wayOverhead shower + hand shower + bath spout
4-wayAdd a body jet or a second overhead
5-wayAdd a body-jet pair or a shoulder shower
6-wayFull spa enclosure: rain, hand, spout, body jets, shoulder shower, ceiling shower
Rule of thumb: count your planned outlets, then buy one size up if there's any chance of adding a body shower later. An unused outlet can be capped. A missing one means opening the wall again.

The Grafdoer Diverter Range

RangeFormatNotes
Clyra Thermo 3 / 4 / 5 / 6Thermostatic switch-button3 to 6 outlets; Chrome, Black (B), Gold (G), Rose Gold (RG)
Single Lever Concealed DiverterConcealed, leverContemporary minimal trim
Single Lever Concealed MixerConcealed, leverMixer + diverter in one
Concealed MixerConcealed, knobClassic control format
Thermostatic MixerConcealed, thermostaticTemperature-stable
Concealed PartWall bodySold to match trim sets
Every finish is available across the Clyra Thermo family, so a designer specifying rose gold basin taps can carry that exact finish through to the shower controls without hunting across brands.

High Flow Diverter - Why Flow Rate Decides Your Shower Experience

A rain shower head with 100+ nozzles needs volume. Push it through a narrow-bore diverter and you get a disappointing drizzle regardless of how much you spent on the shower head itself.A high flow diverter uses a wider internal bore and a larger cartridge port to move more water per minute. It matters most when:
  • You've specified a large overhead or ceiling rain shower
  • You're running body jets, which draw water simultaneously
  • Your building has moderate rather than high mains pressure
  • You want two outlets running at once without either weakening
Pressure prerequisite: most standard diverters need a minimum of around 0.5 bar to work properly, and thermostatic units generally want 1.0–1.5 bar or more to hold temperature reliably. If you're on gravity-fed overhead tank supply with a short head height, either raise the tank or fit a pressure pump - no diverter can create pressure that isn't there. (Confirm exact figures against the spec sheet for your chosen model.)

What's Inside a Diverter Full Set

A complete bathroom diverter set generally includes:
  • Concealed body - the brass valve that goes into the wall
  • Cartridge - ceramic disc or thermostatic element
  • Wall plate / escutcheon - the visible flange covering the wall opening
  • Handle, lever or button panel - the control you actually touch
  • Fixing hardware - screws, seals, O-rings, wall union
If you're buying a diverter set for a bathroom at the rough-in stage, order the concealed body early - it needs to be installed before tiling - and store the trim kit sealed until the finishing stage so it doesn't get scratched by site work.

How to Choose the Right Diverter for Your Bathroom

Match the Diverter to Your Outlets

Count outlets first, then choose. Plan for the shower you want in five years, not the one you're installing this month.

Check Your Water Pressure First

Measure or ask your builder. Low pressure plus a thermostatic diverter is the single most common cause of "the product is faulty" complaints that turn out to be plumbing complaints.

Pick a Finish That Matches the Rest of the Bathroom

Chrome is the safe, universal, easy-to-clean default. Matte black suits dark stone and industrial schemes but shows water spots in hard-water areas. Gold and rose gold read warm and luxurious against beige, marble and wood tones. Whichever you choose, keep the diverter, faucets and accessories in the same finish family from the same brand - cross-brand "gold" almost never matches.

Diverter Price in India - What You're Actually Paying For

Bathroom diverter price varies widely, and the difference is real, not just branding.
TypeIndicative price band
Exposed wall mixer with diverter spoutEntry level
Concealed diverter (knob)Mid
Single lever concealed diverterMid–premium
Thermostatic / switch-button diverterPremium
What drives cost:
  • Body material - solid forged brass costs more than zinc alloy and lasts far longer inside a wall
  • Cartridge quality - quality ceramic cartridges are typically rated for hundreds of thousands of open-close cycles
  • Number of outlets - more ports, more machining
  • Finish process - PVD-coated gold and black finishes cost more than standard chrome plating, and resist wear better
  • Thermostatic element - a genuine temperature-stable cartridge is the biggest single cost jump
The honest advice: on a concealed diverter, do not economise on the body. The trim can be replaced in twenty minutes. The body inside the wall cannot be replaced without demolition.

Installation and Maintenance

Installation Checklist for Plumbers and Contractors

  1. Confirm wall depth against the concealed body's minimum and maximum installation depth before chasing the wall.
  2. Flush all supply lines thoroughly before connecting - construction debris is the leading killer of new cartridges.
  3. Observe hot and cold inlet orientation; reversed inlets on a thermostatic unit will invert your controls.
  4. Pressure-test before tiling. Finding a leak after the tiles are grouted is an expensive lesson.
  5. Keep the protective cap on the body during tiling and plastering.
  6. Fit the trim last, after tiling and cleaning, to avoid scratches.

Keeping Your Diverter Working for Years

  • Wipe with a soft damp cloth; dry after use in hard-water areas
  • Never use acidic descalers, scouring pads or abrasive cream on plated finishes
  • Descale outlet nozzles rather than forcing the diverter handle if flow drops
  • If you notice water leaking from an outlet that should be closed, replace the cartridge early - a worn cartridge wastes water daily

Why Buy a Grafdoer Diverter

Grafdoer is the bath and kitchen brand from VMS Bath and Kitchen India Pvt. Ltd., serving Indian homes and projects for over 23 years. That matters for a product you're going to seal inside a wall.
  • Full-format range - concealed, single lever, thermostatic and switch-button diverters under one brand
  • 3 to 6 outlet options - the Clyra Thermo family scales with your shower design
  • Four finishes, matched across categories - chrome, black, gold and rose gold, consistent from faucets to showers to accessories
  • Project-ready - specification support for architects, developers and hospitality buyers
  • Warranty and support - registration, customer support and after-sales service backing every Grafdoer diverter
For architects and hotel procurement teams, the practical advantage is coordination: one brand, one finish standard, one point of contact for a whole floor of bathrooms.

Ready to Upgrade Your Bathroom?

The diverter is a small fitting that quietly decides how your shower feels every single morning. Choose one with a solid brass body, the right outlet count and a finish that ties your bathroom together - and you'll never think about it again, which is exactly the point.Browse the full Grafdoer diverter collection above, compare outlet configurations and finishes, and add your chosen set to cart. For project quantities, custom finish specification or technical drawings, contact the Grafdoer team or download the full product catalogue. Our team can help you match every diverter, faucet and shower in your project to a single finish standard.