
How to Choose the Right Bathroom Faucet for Your Wash Basin
Choosing a bathroom faucet isn’t just about finding a style that fits your bathroom’s aesthetic.
A bathroom faucet can look just right in your space but still be uncomfortable to use. You may find water splashing everywhere or have to awkwardly position your hands under the spout.
These issues often come down to details that are easy to overlook when selecting a faucet.
The height of the faucet, the reach of the spout and where the faucet is mounted will determine how comfortable it is for you to use the wash basin. Also, just because a design works well with one basin doesn’t mean it is suitable for another.
Here’s what to consider when choosing a bathroom faucet for your space.
1. Start With Your Wash Basin Design
The design of your wash basin has a strong influence over your choice of faucets. Let’s understand different types of basins and the faucets they are compatible with:
Countertop Basins
Countertop basins are elevated higher than most standard basins as they sit above the counter. They tend to be compatible with tall pillar cocks or wall-mounted basin mixers. With either, you have more than enough space between the tap and the basin. A standard-height faucet may sit too low and make handwashing uncomfortable.
Under-Counter Basins
Under-counter basins are fitted beneath the countertop, with only the inside of the basin visible above it. As the bowl is below the surface, it’s going to be a little lower than a traditional tub, so the standard-height faucet is usually enough. However, the spout should still extend over the bowl far enough for the water to fall into it comfortably.
Wall-Hung Basins
Wall-hung basins are fixed directly to the wall, without a countertop underneath. A tap can be installed either on the basin itself or on the wall above it, according to the model. If you have a tap hole, then a deck-mounted tap can be used; if not, then you may prefer a wall-mounted tap.
2. Choose the Right Faucet Height
After you’ve figured out your basin type, you need to double-check the faucet height.
The distance between the spout and the basin must be adequate for washing hands comfortably but not so high that water splashes onto the countertop or the floor.
Countertop basins often require a taller tap than normal as the bowl sits above the counter. This often takes a taller pillar cock to give you the height for everyday use. Wall-mounted basin mixers can also be used, but at the correct height.
When measuring for a countertop basin, remember to measure the distance from the outlet of the faucet to the rim of the basin. There should be enough room to place your hands comfortably without making the water fall from an excessive height.
For under-counter and many wall-hung basins, standard-height faucets may work well. However, the basin’s depth and shape still matter.
For example, A deep bowl may need a longer spout, while a shallow one may require more careful positioning to prevent splashing.
3. Check the Spout Reach and Water Flow Position
Faucet height is only one part of the equation. The spout also needs to extend far enough over the basin. This measurement is known as spout reach. It determines where the water enters the bowl.
If the spout is too short, the water will land near the back edge of the basin, making it difficult to wash your hands easily. And if it extends too far, the water can hit the front or the side of the bowl leading to water splashing.
Ideally, the water should fall roughly in the centre of the basin, or as near to the drain as possible, again dictated by the shape of the bowl.
For accurate measurement, compare the spout reach to the basin’s width and depth of the bowl to ensure the spout comfortably sits over the basin.
4. Wall-Mounted or Deck-Mounted: Which One Works Better?
Once you’ve confirmed the height and reach, think about where the faucet will go. There are two standard locations for faucets: wall-mounted and deck-mounted. Either will do the job, but the two have different aesthetics and applications.
Deck-Mounted Faucets
These faucets are mounted on the basin or countertop. They are advantageous if the basin has a tap hole or if the countertop is sufficiently large for installation. They are generally easy to repair and replace.
Wall-Mounted Faucets
Wall-mounted faucets are attached to the wall above the basin. They keep the counter clear and are mostly compatible with countertop basins. They also allow some flexibility in positioning the spout at a comfortable height.
But wall mounted faucets require a little extra planning. The water supply connections must be positioned correctly inside the wall before the tiles and other finishes are completed. This is because Changing their position later can involve additional plumbing work.
So what type of faucet should you pick? It’s going to really depend on the design of your basin, room, and plumbing layout. While a wall mounted tap may be aesthetically pleasing, if the tap and plumbing are already in place, a deck mounted tap may be more suitable
5. Single-Lever or Two-Handle Faucet?
Another aspect that’s worth thinking about is the way in which you operate the tap. Do you want to be able to control both temperature and flow easily? If so, you might find a single-lever basin mixer handy as it uses one handle to adjust both. This makes everyday use simple, especially when you need to change the temperature quickly.
A two-handle mixer features separate controls for hot and cold water. Each supply can be adjusted independently to achieve your preferred temperature.
If you prefer a traditional faucet, then opt for this one.
Your selection will be determined by the type of water supply you have and the way in which you want to use the faucet. For example, if your bathroom is supplied with only a cold-water source, a regular cold-water faucet is good enough.
6. Check Installation Compatibility Before Buying
Now, even if a faucet appears to be fitting for your basin, it might not go well with your installation. Measuring a few things in advance can help you to avoid annoying modifications.
Begin by confirming the number and placement of the mounting holes. Some basins feature a single tap hole, while others have separate openings to accommodate various faucet designs.
If you are choosing a deck-mounted faucet, also check the available countertop space and thickness.
If you are buying a model to be installed on the wall, check the location of the water supply connections and installation height. It is also worth seeing if the faucet needs additional fittings, such as connecting hoses or mounting hardware.
If you are replacing a faucet, compare whether the connection type and measurements of your new model are the same as the previous one. This will give you an idea of whether you may require any additional pieces when installing.
A Good Faucet Choice Starts With the Basin
A bathroom tap should be pleasant to use from the very first day. The style is important, but how it sits in the basin is equally so. Correct height, the right reach of the spout and where you install it allow you to have a comfortable experience without splashing or awkward hand movements.
Before choosing a model, take a closer look at your basin’s dimensions and installation requirements. A little thought at this stage will prevent any changes later when your bathroom is complete.
Explore Grafdoer’s range of bathroom faucets to find options that complement your wash basin and suit your space.




